SKU: 120351 Mercury Thin FLEX CA Glue - 2oz

Comes in a 2oz bottle.

Resin: . . . . . . . . . . . . . . . . . Alkyl Cyanoacrylate

Color: . . . . . . . . . . . . . . . . . . . . . . Clear

Cure Speed with Activator: . . . . . . < 5 seconds

Cure Speed without Activator: . . . 2- 20 seconds*

Viscosity : . . . . . . . . . . . . . . . . . . . . 2-6cps

Gap Fill: . . . . . . . . . . . . . . . . . . . . . .002"

Flash Point: . . . . . . . . . . . . . . . . . . >185°F

Shelf Life: . . . . . . . . . . . . .. . . . . 24 months @ 40°F

Specific Gravity: . . . . . . . . . . . . . . 1.06

Max. Operating Temperature: . . . –65°F to + 185°F

* Depending on substrate

Full Cure Time: . . . . . . . . . . . . . . 24 hours @ 68°F

Tensile Shear Strength: . . . . . . 3000-3700 psi

Store in a cool area out of direct sunlight. Refrigeration

to 40°F gives optimum storage stability.

Bond time is extremely fast, align parts prior to

assembly. Also for locking parts that are pre-assembled.

Very low Viscosity

Speed: . . . . . . .. 

 Metal/Metal <20seconds

 Plastic/Plastic <10 seconds

 Rubber/Rubber <5 seconds

Test on non-essential portion to ensure compatibility

first. Ensure parts are clean, dry and free from oil and

grease. Product is applied direct from the bottle. Apply

sparingly to one side and hold parts together until

handling strength is achieved. Bonding can be

immediate so careful, speedy alignment of parts can be

requires. Store in a cool area out of direct sunlight.

Refrigeration to 40°F gives optimum storage stability.

MH16 Activator can be used for fillet cure or for

priming absorbent surfaces.