Your Cart (0)
Thumbnail Filmstrip of Mercury Medium CA Glue - 8oz Images
This glue performs well when bonding close-fitting parts incuding: plastics, rubbers, metal, wood, leather, fabric and composites to themselves or in various combinations.
Comes in an 8oz bottle.
TECHNICAL FEATURES
Resin: . . . . . . . . . . . . . . . . . Alkyl Cyanoacrylate
Color: . . . . . . . . . . . . . . . . . . . . . . Clear
Cure Speed with Activator: . . . . . . < 5 seconds
Cure Speed without Activator: . . . 2- 20 seconds*
Viscosity : . . . . . . . . . . . . . . . . . . . . 200-400 cps
Gap Fill: . . . . . . . . . . . . . . . . . . . . . .002"
Flash Point: . . . . . . . . . . . . . . . . . . >185°F
Shelf Life: . . . . . . . . . . . . .. . . . . 24 months @ 40°F
Specific Gravity: . . . . . . . . . . . . . . 1.06
Max. Operating Temperature: . . . –65°F to + 185°F
* Depending on substrate
CURED PERFORMANCE
Full Cure Time: . . . . . . . . . . . . . . 24 hours @ 68°F
Tensile Shear Strength: . . . . . . 3000-3700 psi
STORAGE
Store in a cool area out of direct sunlight. Refrigeration
to 40°F gives optimum storage stability.
HEALTH & SAFETY IN USE
Contains Cyanoacrylate. Bonds skin and eyes in seconds.
If accidental skin bonding happens, use Debonder
M68DB and wash with warm soapy water and rise skin
apart using a blunt instrument (such as a teaspoon
handle). In case of eye contact, bath immediately with
water and seek immediate medical attention.
KEEP OUT OF REACH OF CHILDREN
USEFUL HINTS/NOTES
Bond time is extremely fast, align parts prior to
assembly. Also for locking parts that are pre-assembled.
PROPERTIES
Very low Viscosity
Speed: . . . . . . .. Metal/Metal <20seconds
Plastic/Plastic <10 seconds
Rubber/Rubber <5 seconds
INSTRUCTIONS FOR USE
Test on non-essential portion to ensure compatibility
first. Ensure parts are clean, dry and free from oil and
grease. Product is applied direct from the bottle. Apply
sparingly to one side and hold parts together until
handling strength is achieved. Bonding can be
immediate so careful, speedy alignment of parts is
required. Store in a cool area out of direct sunlight.
Refrigeration to 40 F gives optimum storage stability.
COMPATIBLE ACCELERATORS/PRIMER
MH16 Activators can be used for fillet cure or for
priming absorbent surfaces.
Related Products
