SKU: 120323 Mercury Thick CA Glue - 2oz

This viscosity is perfect for working with wood trim on furniture, balsa wood bonding for hobbyists, leather accessories on shoes, fabric bows on shoes and lampshade bonding. Other features include versatile bonding of most elastomers, metals and plastics.

Comes in a 2oz bottle.

Resin: . . . . . . . . . . . . . . . . . . . . . Ethyl Hybrid CA

Color: . . . . . . . . . . . . . . . . . . . . . . Clear

Cure Speed with Activator*: . . . . . . < 5 seconds

Cure Speed without Activator*: . . . 5-20 seconds

Viscosity (Thixotropic): . . . . . . . . . 1100 cps

Gap Fill: . . . . . . . . . . . . . . . . . . . . . .008"

Flash Point: . . . . . . . . . . . . . . . . . . >185°F

Shelf Life: . . . . . . . . . . . . . . . . . 24 months @ 68°F

Specific Gravity: . . . . . . . . . . . . . . 1.06

Max. Operating Temperature: . . . -65°F to + 180°F

* Depending on substrait

Full Cure Time: . . . . . . . . . . . . . . 24 hours @ 68°F

Tensile Shear Strength: . . . . . . . . 2500-3700 psi

Store in a cool area out of direct sunlight. Refrigeration

to 40°F gives optimum storage stability.

On Elastomer bonding and some plastics, residues or

release agents on surfaces should be removed by solvent

wipe.

Very thick Viscosity

Speed: . . . . . . .. 

 Metal/Metal <20seconds

 Plastic/Plastic <10 seconds

 Rubber/Rubber <5 seconds

Test on non-essential portion to ensure compatibility

first. Ensure parts are clean, dry and free from oil and

grease. Product is applied direct from the bottle. Apply

sparingly to one side and hold parts together until

handling strength is achieved. Bonding can be

immediate so careful, speedy alignment of parts can be

requires. Store in a cool area out of direct sunlight.

Refrigeration to 40°F gives optimum storage stability.

MH16 Activators can be used for fillet cure or for

priming absorbent surfaces.