SKU: 1203-A Mercury CA Glue - Thin

This glue performs well when bonding close-fitting parts incuding: plastics, rubbers, metal, wood, leather, fabric and composites to themselves or in various combinations.

Choose between 1oz, 2oz, or 8oz bottles.

M5T Instant is a very low viscosity cyanoacrylate was developed for demanding high speed wicking applications. Excellent adhesion and cure speed on difficult to bond plastics and rubbers and contaminated or acidic surfaces. 

APPLICATIONS 

High performance wicking and bonding of close-fitting parts incuding: plastics, rubbers, metal, wood, leather, fabric and composites to themselves or in various combinations. 

USEFUL HINTS/NOTES 

Bond time is extremely fast, align parts prior to assembly. Also for locking parts that are pre-assembled. 

PROPERTIES 

Very low Viscosity Speed: . . . . . . .. Metal/Metal <20seconds Plastic/Plastic <10 seconds Rubber/Rubber <5 seconds 

Test on non-essential portion to ensure compatibility first. Ensure parts are clean, dry and free from oil and grease. Product is applied direct from the bottle. Apply sparingly to one side and hold parts together until handling strength is achieved. Bonding can be immediate so careful, speedy alignment of parts can be requires. Store in a cool area out of direct sunlight. Refrigeration to 40 F gives optimum storage stability. 

COMPATIBLE ACCELERATORS/PRIMER 

MH16 Activator can be used for fillet cure or for priming absorbent surfaces. 

THIN INSTANT M5T Super Fast/High Performance 

TECHNICAL FEATURES 

Resin: . . . . . . . . . . . . . . . . . Alkyl Cyanoacrylate 

Color: . . . . . . . . . . . . . . . . . . . . . . Clear 

Cure Speed with Activator: . . . . . . < 5 seconds 

Cure Speed without Activator: . . . 2- 20 seconds* 

Viscosity : . . . . . . . . . . . . . . . . . . . . 2-6cps 

Gap Fill: . . . . . . . . . . . . . . . . . . . . . .002" 

Flash Point: . . . . . . . . . . . . . . . . . . >185o F 

Shelf Life: . . . . . . . . . . . . .. . . . . 24 months @ 40o F 

Specific Gravity: . . . . . . . . . . . . . . 1.06 Max. 

Operating Temperature: . . . –65o F to + 185o F * Depending on substrate 

CURED PERFORMANCE Full Cure Time: . . . . . . . . . . . . . . 24 hours @ 68o F 

Tensile Shear Strength: . . . . . . 3000-3700 psi 

STORAGE Store in a cool area out of direct sunlight. Refrigeration to 40 F gives optimum storage stability. 

HEALTH & SAFETY IN USE: Contains Cyanoacrylate bonds skin and eyes in seconds. If accidental skin bonding happens, use Debonder M68DB and wash with warm soapy water and rise skin apart using a blunt instrument (such as a teaspoon handle). In case of eye contact, bath immediately with water and seek immediate medical attention. KEEP OUT OF REACH OF CHILDREN